george3616013 資深會員 ![資深會員 資深會員](modules/Forums/images/ranks/tent4.gif)
註冊時間: May 12, 2008 文章: 680 來自: Taiwan
|
發表於: 星期六 2008-08-02 20:37
這款 28x26mm 的代用錶帶,是針對 RXW 及 有些錶款的錶耳是固定的,
錶帶無法拆裝的情況所設計使用.
當然如果把錶帶直接手工縫製在手錶上,就不必使用這兩個小螺絲釦了!
在最下面的那張沒有小釦子的錶帶照片,就是錶帶直接縫製在手錶上面的照片.
下面這款黑色小牛皮代用錶帶,是採用兩片柔軟的小牛皮,
以手工削薄之後,上下兩片貼合在一起, 再用上過臘的麻線,
以手工縫製完成. 規格尺寸ˋ皮革及麻線的顏色,都可以特別訂做.
錶帶使用兩個小螺絲釦,在把錶帶搭配裝置在手錶上之後,
把小螺絲釦安裝在錶帶上, 使用一般的起子, 就可以隨時自己更換錶帶了.
在下圖中, 就是使用小螺絲扣的 RXW 28/26mm 代用錶帶.
圖中短的是錶帶的正面,長的帶子是錶帶的反面.
下面這款 28/26mm chocolate brown calf strap, 適用於錶耳是28mm,
錶帶扣是 26mm的規格.
這款代用錶帶也可以訂做 26/24mm 的規格,可以使用24mm的錶帶扣.
由於是手工" 量錶訂製", 顏色ˋ尺寸ˋ厚度都可依照個人喜好來製作.
下圖就是直接把錶帶縫製在手錶上的照片.
僅此登出與巴友分享! 有關細節 歡迎 pm 詢問 _________________ George Lan
george3616013 在 星期五 2008-09-19 19:32 作了第 4 次修改
|
|
|
keeekeee 進階會員 ![進階會員 進階會員](modules/Forums/images/ranks/tent3.gif)
註冊時間: Oct 03, 2006 文章: 471 來自: Malaysia
|
發表於: 星期六 2008-08-02 22:36
hi how to we release or open the 兩個小釦子 if wanna change strap again?
can PM how much?? thanks ... _________________ [url=blogspot.com/]MY GADGET ROOM ~ [/url]
|
|
george3616013 資深會員 ![資深會員 資深會員](modules/Forums/images/ranks/tent4.gif)
註冊時間: May 12, 2008 文章: 680 來自: Taiwan
|
發表於: 星期二 2008-08-12 16:21
Hi ! This strap was designed for some watchs that its lugs were fixed .
Since that whenever want to change the straps the wearing strap have to cut off .
If won't to cut off the wearing strap there is a proper method by cutting it off from
the buttons.
We provide the buttons and its tool for free as a special bonus. _________________ George Lan
|
|
george3616013 資深會員 ![資深會員 資深會員](modules/Forums/images/ranks/tent4.gif)
註冊時間: May 12, 2008 文章: 680 來自: Taiwan
|
發表於: 星期二 2008-08-12 16:24
keeekeee 寫到: | hi how to we release or open the 兩個小釦子 if wanna change strap again?
can PM how much?? thanks ... |
Hi ! This strap was designed for some watchs that its lugs were fixed .
Since that whenever want to change the straps the wearing strap have to
cut off .
If won't to cut off the wearing strap there is a proper method by cutting it
off from the buttons.
We provide the buttons and its tool for free as a special bonus.
There are a kind of screw button instead of the buttons [兩個釦子]
that the straps can change easily! _________________ George Lan
|
|
george3616013 資深會員 ![資深會員 資深會員](modules/Forums/images/ranks/tent4.gif)
註冊時間: May 12, 2008 文章: 680 來自: Taiwan
|
發表於: 星期六 2008-08-16 11:30
keeekeee 寫到: | hi how to we release or open the 兩個小釦子 if wanna change strap again?
can PM how much?? thanks ... |
感謝 keeekeee大 提問, 關於如何重新更換錶帶的問題,
我們另外還有提供小螺絲扣[screw buttons]的使用方法.
前兩張分別是黑色和咖啡色28/26mm RXW 代用錶帶,
使用小螺絲扣來固定.用一般的起子就可以隨時更換錶帶了.
第三張照片可以看到錶帶背面的小螺絲扣.
![](http://www.watchbus.com/modules/coppermine/albums/userpics/32587/RXW%2028-26mm.jpg) _________________ George Lan
|
|
|
|
|