WatchBus 手錶討論區 :: 觀看文章 - [分享]石英錶的藝術
開新主題 回覆文章 Share
發表人 內容
Blithe
終極會員
終極會員
發表 發表於: 星期三 2006-03-08 10:12
引言回覆

分享網路上找到的關於 Seiko 8F 機芯的貼文:

Author:highvista

The movement in the SLT047 (I have one) is the 8F56. It is one of those that is advertised as accurate to +/- 20 seconds/yr (on wrist) and has the high-frequency quartz. There is also the 8F35 movement used in the SBCM023 Prospex diver, also advertised as high-accuracy. And, I believe the SBQL001 uses the 8F33 movement, again high-accuracy. The one difference I know with the 8F33 movement is that it has both day and date displays.

I can't give a personal report for any but the SLT047, which has been accurate to around 8-9 sec/yr (as measured over a few months) on wrist. I've read reports on the Seiko & Citizen Forum about both the SBCM023 and SBQL001 that indicate they are also at least living up to the +/- 20 seconds/yr standard.


Author: ppaulusz

The answer is very simple: Seiko watches with 8F (4F for ladies version) movements are rated for ±20 sec/year accuracy. They all have perpetual calendar function and run on lithium batteries:
8F32: hour + minute + second (hands) + date
8F33: hour + minute + second (hands) + date + day of the week
8F35: hour + minute + second (hands) + date - this is the diver version and the battery last for 8 years only instead of the usual 10 years (could be for the heavier hands???)
8F56: hour + minute + second (hands) + date + 24-hour hand (GMT)
4F32: ladies version of 8F32 (smaller battery runs for 5 years)
4F56: ladies version of 8F56 (smaller battery runs for 5 years)

In other words, you don't even need to know the Seiko caliber as long as the watch has perpetual calendar it is the high-accuracy quartz movement. The "Perpetual Calendar" is always written on the dial so you can't miss it.
Just be aware that Seiko released recently the Kinetic Perpetual Calendar line of movements:
- Caliber 5Y85 (accuracy: ±20 sec/month)
- Caliber 6A32 (accuracy: ±20 sec/month)
- Caliber 7D48 (accuracy: ±15 sec/month)
- Caliber 7N82 (accuracy: ±15 sec/month)
- Caliber 7T62 (accuracy: ±15 sec/month)

年誤差 +/- 20 seconds 是很準的!

微笑

更多關於 High-end Quartz 的貼文:

http://forums.watchuseek.com/forumdisplay.php?f=9

眨眼

_________________
「家貧出孝子,困境造賢人.」
「把手指放在善惡交界之處,就可以碰觸上帝的袍服。」
onlyseiko
資深會員
資深會員
發表 發表於: 星期三 2006-03-08 10:35
引言回覆

每次想到石英晶體每秒震動3萬多次(傳統石英)或十九萬多次(高頻石英),
都替它們捏把冷汗......

溫度是影響石英震動頻率的關鍵,
所以才會要求使用者常時間戴在手上以保持溫度在攝氏28度左右.
還聽說過O牌的石英可達2秒/年.
驚訝
watchfreak
榮譽版面管理員
榮譽版面管理員
發表 發表於: 星期三 2006-03-08 10:48
引言回覆

如果沒有預算的問題,可以考慮勞力士的石英表,此表同時具有機械表與石英表的魅力,也是勞力士自制機芯,可惜卻被市場忽略了。

此表已經停產,市面上已經剩不多新品。
derek_0415
初級會員
初級會員
發表 發表於: 星期三 2006-03-08 12:02
引言回覆

再問各位板主一個問題,石英表也需要洗油嗎??還時只需要換電池而已。 眼睛轉啊轉
onlyseiko
資深會員
資深會員
發表 發表於: 星期三 2006-03-08 12:26
引言回覆

也要洗油的.
因為驅動各指針的也是齒輪,
有的石英機芯也載有幾顆寶石.

但因沒有像機械錶擺輪的軸心磨得那麼兇,
所以可能可以很久才洗一次吧~
(機械錶我看大概三年一次,
石英錶五到十年一次.)
derek_0415
初級會員
初級會員
發表 發表於: 星期三 2006-03-08 13:54
引言回覆

onlyseiko 寫到:
也要洗油的.
因為驅動各指針的也是齒輪,
有的石英機芯也載有幾顆寶石.

但因沒有像機械錶擺輪的軸心磨得那麼兇,
所以可能可以很久才洗一次吧~
(機械錶我看大概三年一次,
石英錶五到十年一次.)
謝謝,我瞭解了。 非常高興
從之前的文章開始顯示:
2頁(共2頁)
前往:

無法 在這個版面發表文章
無法 在這個版面回覆文章
無法 在這個版面編輯文章
無法 在這個版面刪除文章
無法 在這個版面進行投票
無法 在這個版面上傳附加圖檔
可以 在這個版面下載已上傳之附加圖檔