WatchBus 手錶討論區 :: 觀看文章 - [問題]Omega AT/Seamaster 石英錶秒針不規率跳動
開新主題 回覆文章 Share
發表人 內容
schumacher0819
資深會員
資深會員
發表 發表於: 星期三 2004-12-29 18:36
引言回覆

原來我的TAG Heuer 秒針誤差是通病啊...
只是我的是在45秒到50秒之間...
GS的石英錶我也很想買.
可是我現在已經有這隻了.
我想就多存一點買GS 機械錶吧...
這隻TAG Heuer 或許還可以撐到到我買GS機械錶那時候........
waisir
初級會員
初級會員
發表 發表於: 星期三 2004-12-29 18:52
引言回覆

我覺得這現象,跳一下震一下就好似一個人冇力行上山頂
總覺得當秒針行到 30-50時刻時就冇晒氣力可以上去 60時刻
的山頂
waisir
初級會員
初級會員
發表 發表於: 星期三 2004-12-29 18:57
引言回覆

Re: Omega Aqua Terra Quartz -- jdbtensai Post Reply Top of thread Forum
Posted by: AB ?/small>
12/29/2004, 00:47:30

--------------------------------------------------------------------------------


When shopping for my AT, I considered quartz for a while. I noticed that the second hand on the quartz ATs seemed to hesitate at certain points on the dial, rather than clicking forward in exactly the same way once per second. Look at one for a full minute while in the vertical (12 up) position, especially between 30 and 35 seconds past the minute. I noticed this on every quartz AT I looked at. Also, the second hand did not always line up with the graduations on the dial - also noticed on quartz SMPs. I found this unacceptable for this amount of money, or *any* amount of money.
I knew all along that I really wanted an automatic, and eventually convinced myself that I could live with the "inaccuracy" and power reserve. I have only had my coaxial black/steel AT a month, but I have not regretted my choice for a second.


以上是某一外國綱站討論的同一個問題
waisir
初級會員
初級會員
發表 發表於: 星期三 2004-12-29 20:36
引言回覆

需然精工大部份石英秒針都行得頗暢顺
但 Auto relay 系列也有此問題出現
但現象比較沒有 Omega的那麼明顯
1975
資深會員
資深會員
發表 發表於: 星期四 2004-12-30 13:02
引言回覆

waisir 寫到:
需然精工大部份石英秒針都行得頗暢顺
但 Auto relay 系列也有此問題出現
但現象比較沒有 Omega的那麼明顯

我的SEIKO AUTO RELAY剛才特別看了一下發現還好啦!倒是OMEGA的石英錶真的很會彈,那種好像是手拿著棍子用力揮動又瞬間停止的感覺 難過 一般家裡面的掛鐘有的也會有這種情形 哈 哈 哈 哈 哈 哈 哈 哈 哈

_________________
該決定的時候,擔心結果不如預期;看明白了,又後悔當初沒有下決心...
不屬於自己的,常常心存慾望;握在手裡了,又懷念未擁有前的輕鬆...
從之前的文章開始顯示:
2頁(共2頁)
前往:

無法 在這個版面發表文章
無法 在這個版面回覆文章
無法 在這個版面編輯文章
無法 在這個版面刪除文章
無法 在這個版面進行投票
無法 在這個版面上傳附加圖檔
可以 在這個版面下載已上傳之附加圖檔