有 216 筆資料符合您搜尋的條件
| 發表人 | 內容 |
|---|---|
| 主題:[問題]保養後卻走快 | |
| 主題:114060突然不能上鏈了 | |
| 主題:[問題]保養後卻走快 | |
| 主題:(求推薦)想拜師學鐘錶組裝 | |
|
發表於: 星期日 2017-12-24 17:21
http://www.timezonewatchschool.com/WatchSchool/Enroll/enroll.shtml
坊間教學水平好參差，俾US $75 讀個distance learning course + 實習，如果自信可深造再讀上去！ |
|
| 主題:[請教]洗油的方法與技巧 | |
|
發表於: 星期日 2017-07-30 02:09
http://www.timezonewatchschool.com/WatchSchool/
俾 US$75 讀一個 distance learning course，讀兩個 course + practice 就學識洗油 + 維修 |
|
| 主題:Plopro 1,200M | |
|
發表於: 星期六 2017-01-21 14:45
是鈦合金 8912機芯嗎
Calibre: Omega 8912 Self-winding movement with Co-Axial escapement. Movement and watch tested according to Master Chronometer certification process approved by METAS. Resistant ... |
|
| 主題:晚上如何放手錶？ | |
|
發表於: 星期三 2016-09-28 11:38
"When removing your watch, always keep it in either the crown down position, or in the dial up position. Since the watch has been regulated to run accurately in these two positions, your watch will no ...
|
|
| 主題:新手買那支好？ （加了上手照！！！） | |
| 主題:專屬改裝廠-厲害 | |
|
發表於: 星期三 2014-12-31 17:44
如果冇記錯:
Rolex 年產超過 80萬隻，是唯一一間錶牌能擠身世界 100大最成功工業裏，就算而家開始不賣錶、不減產也不停產和不裁員，也能繼續生存 80年的錶牌，一直致力生產最耐操、最穩定和準確機械機蕊的偉大品牌� ... |
|
| 主題:tudor 20550n和 tudor 70330n該選擇那一隻？ | |
| 主題:[請教]家父給的白K Day-Date請益 | |
| 主題:[問題]機芯零件 | |
|
發表於: 星期日 2014-03-09 22:17
俾 US $75 讀個 distance learning course:
http://www.timezonewatchschool.com/WatchSchool/Enroll/enroll.shtml |
|
| 主題:[問題 ]tudor 紅水鬼.....讓我好失望 | |
|
發表於: 星期日 2014-02-02 18:30
如果每日戴超過 3 小時，就唔應該停走。
我數年前買幾個 ETA2824-2 機蕊，其中有一件裝錶后間中停走，拆開發現發條鼓頂的齒輪有兩隻牙不完整("崩咗")，相連細齒輪所有牙位卻 OK，拆開洗油也沒發現缺損部份，� ... |
|
| 主題:[討論]才買3個月的浪琴超擺了.......... | |
|
發表於: 星期四 2014-01-30 02:15
個人認為，ETA 機蕊，已經比日本仔貨好好多，但與 Rolex 相比始終有距離，這關符設計、要求、目標、用料和生產精密度，機械手錶裝配、加潤滑油和調較像砌模型，不同師傅得出不同質量水平和效果，好處是可多次維修和� ...
|
|
| 主題:[問題]請問各位前輩您們手上的Seamaster秒差大概多少? | |
|
發表於: 星期三 2012-01-11 16:58
這個唔錯，我早年砌隻 2824 俾個仔上學帶，他經常放手機旁，每日快拾幾分鍾，消磁后 OK，而家帶 Seamaster，我 fine tuned 后，每日+3S，不用消磁。
http://i146.photobucket.com/albums/r271/0925photo/DSCF2239 ... |
|
| 主題:[問題]請問各位前輩您們手上的Seamaster秒差大概多少? | |
|
發表於: 星期二 2012-01-10 23:59
Seamaster 有防磁 soft iron cover 較難磁化：
http://i146.photobucket.com/albums/r271/0925photo/DSCF2260.jpg |
|
| 主題:[問題]請問各位前輩您們手上的Seamaster秒差大概多少? | |
|
發表於: 星期二 2012-01-10 23:51
如受磁了 balance spring 會粘在一起，祗會快不會慢，如果每日慢走秒數相同，可能手表受碰撞 regulator or spring stud 移位，上旗艦店即調即取。
|
|
| 主題:[問題]SEIKO 6R15B 和 ETA 2824-2 哪個是較耐用耐操的好選擇？ | |
|
發表於: 星期四 2012-01-05 20:26
原本選擇6R15B，是看上他的"耐用"(避震比ETA2824-2多、振頻低且結構上磨耗較慢、滿鍊可撐50小時等......)
但其實滿喜歡Tissot機械錶的外型(ETA 2824-2機芯)、穩定度及高振頻秒針的滑順度， 可是基於"耐用"考量，又 ... |
|
| 主題:勞力士日誤差問題 | |
| 主題:老TUDOR | |
| 主題:[討論] 第一次就中標 第一隻錶INVICTA | |
|
發表於: 星期四 2010-07-15 11:46
我多ロ答一答你的問題：
1) 那我想在問一個問題~~在組裝時，空氣中的濕度不會造成上述的現象嗎? 還是好的錶廠會控制空氣中的濕度??? -- 所有"合格錶廠"，都有溫、濕控制和空氣過濾系統。 2) 小錶廠會 ... |
|
| 主題:請教大家潛水表的外圈 | |
|
發表於: 星期三 2010-07-14 14:05
Usually, the colored number ring is an aluminium "name-plate" glued on the bezel.
http://i146.photobucket.com/albums/r271/0925photo/Thebezelandhandsofmywatcharenotf-1.jpg http://i146.photobucket ... |
|
| 主題:請教大家潛水表的外圈 | |
|
發表於: 星期三 2010-07-14 13:25
The Ocean7 LM-6 is 44mm in size while its ETA 2824-2 movement is only in 11.5 ligne (~26mm). I guess you prefer ~35.5mm Seamaster:
http://i146.photobucket.com/albums/r271/0925photo/DSCF2260.jpg ht ... |
|
| 主題:請教大家潛水表的外圈 | |
|
發表於: 星期一 2010-07-12 23:10
Try this one!
The bezel is in solid stainless steel. Tough, heavy metal, antimagnetic and high C/P value (US $499 only) -- WR to 500M. http://i146.photobucket.com/albums/r271/0925photo/DSCF2356.j ... |
|
| 主題:[討論]可否推薦粗戴錶 | |
|
發表於: 星期四 2009-11-12 10:11
Sorry, the correct link for "http://www.gnomonwatches.com/Ollech&WajsID3077.html " should be:
http://www.gnomonwatches.com/Ollech&WajsID3077.htm |
|
| 主題:[討論]可否推薦粗戴錶 | |
|
發表於: 星期四 2009-11-12 10:08
You may consider the following:
http://www.gnomonwatches.com/SteinhartOcean1Black.html http://www.gnomonwatches.com/Ollech&WajsID3077.html A bit "replica" feel, but the watches themselves ... |
|
| 主題:如果機芯的大小擺異常了，表的運行會有什么表現？ | |
|
發表於: 星期五 2009-10-16 12:46
寫中文要用手寫板。
"現在唯一感覺到的問題就是和發條鬆緊有關,戴的日子多了(白天戴，晚上不戴),感覺發條會不斷上緊. 大小擺異常會造成這種結果嗎?" --- 晚上不戴，發條不會、亦不可能不斷上緊。 "我沒有校表� ... |
|
| 主題:如果機芯的大小擺異常了，表的運行會有什么表現？ | |
|
發表於: 星期五 2009-10-16 09:56
I think the beat error of your watch is high, the amplitude is too small and uneven and there is a significant deviation when it is placed at different positions. You need a timegrapher for readjustme ...
|
|
| 主題:我這個是不是真的ETA機芯呀 | |
|
發表於: 星期三 2009-10-07 13:03
Copied from "TZ tool Shop":
http://i146.photobucket.com/albums/r271/0925photo/kifchartnew1.jpg http://i146.photobucket.com/albums/r271/0925photo/shockinginca.jpg |
|
| 主題:請教 修錶用的5號鑷子 那一種廠牌好用 | |
| 主題:[請教]請問各位前輩…如果你有150000元…你會買rolex還是沛納海 | |
| 主題:勞雷特集..製錶傳統！..勞雷技術討論研究！ | |
|
發表於: 星期日 2009-08-30 02:24
個人認為，Euro Tool 的 LG case wrench 除肽盤匙外 US$ 100 內最好用的:
http://i146.photobucket.com/albums/r271/0925photo/DSCN2597.jpg |
|
| 主題:勞雷特集..製錶傳統！..勞雷技術討論研究！ | |
|
發表於: 星期日 2009-08-30 02:19
可以推上 15000 嗎?
http://i146.photobucket.com/albums/r271/0925photo/DSCN2591.jpg http://i146.photobucket.com/albums/r271/0925photo/DSCN2594.jpg |
|
| 主題:勞雷特集..製錶傳統！..勞雷技術討論研究！ | |
|
發表於: 星期六 2009-08-29 14:46
Pin gauge:
http://i146.photobucket.com/albums/r271/0925photo/Pingauge.jpg |
|
| 主題:勞雷特集..製錶傳統！..勞雷技術討論研究！ | |
|
發表於: 星期六 2009-08-29 14:33
提高各大大對修表的興趣：
http://i146.photobucket.com/albums/r271/0925photo/DSCN2587.jpg |
|
| 主題:勞雷特集..製錶傳統！..勞雷技術討論研究！ | |
|
發表於: 星期五 2009-08-28 10:39
Copied from the internet:
http://i146.photobucket.com/albums/r271/0925photo/RolexBalancePage11.jpg |
|
| 主題:【原創】Rolex勞力士1601-1570機芯-拆解洗油全過程 | |
|
發表於: 星期四 2009-08-27 15:58
拆解洗油祗是第一步，裝配時檢查，零件維修，上油及較準，相信poppoppop兄都很熟，請勿怀疑。
活了四、五拾年，至今仍未見一個不懂手表結構、運作而能拆裝、洗油和較準的奇人。 |
|
| 主題:勞雷特集..製錶傳統！..勞雷技術討論研究！ | |
|
發表於: 星期四 2009-08-27 15:03
來來來，齊齊 DIY:
http://i146.photobucket.com/albums/r271/0925photo/DSCN2576.jpg http://i146.photobucket.com/albums/r271/0925photo/DSCN2569.jpg http://i146.photobucket.com/albums/r271/0925pho ... |
|
| 主題:勞雷特集..製錶傳統！..勞雷技術討論研究！ | |
|
發表於: 星期四 2009-08-27 08:30
AF watch winder
1st modification: http://i146.photobucket.com/albums/r271/0925photo/Modifiedwatchwindernewlyassembledwa.jpg 2nd modification: http://i146.photobucket.com/albums/r271/0925photo/ ... |
|
| 主題:勞雷特集..製錶傳統！..勞雷技術討論研究！ | |
|
發表於: 星期三 2009-08-26 23:32
poppoppop 兄,
利害！！！ http://i146.photobucket.com/albums/r271/0925photo/Constellation.jpg |
|
| 主題:勞雷特集..製錶傳統！..勞雷技術討論研究！ | |
|
發表於: 星期三 2009-08-26 21:13
dogskin 兄,
某些 product 價錢貴一點，但信用還可以： http://www.ofrei.com/page557.html |
|
| 主題:勞雷特集..製錶傳統！..勞雷技術討論研究！ | |
|
發表於: 星期三 2009-08-26 14:14
tudor94614 兄,
LG retaining rings 尺寸有偏差，bergeon 的 retaining rings 尺寸很準，操作正確，兩件都 OK，不會傷到底蓋和底下鏡面。 |
|
| 主題:勞雷特集..製錶傳統！..勞雷技術討論研究！ | |
|
發表於: 星期三 2009-08-26 13:55
LG 是 cheap 了點，但它也曾陪伴我 2 、3 年：
http://i146.photobucket.com/albums/r271/0925photo/LGOpenallcasewrench.jpg |
|
| 主題:勞雷特集..製錶傳統！..勞雷技術討論研究！ | |
|
發表於: 星期三 2009-08-26 13:45
原裝是好，買不到 Horotec + Bergeon 也OK:
http://i146.photobucket.com/albums/r271/0925photo/Horotec_case_opener.jpg |
|
| 主題:ETA機芯的取得 | |
| 主題:[請教]手錶受磁問題 | |
|
發表於: 星期三 2009-08-12 13:44
Copied from the internet:
[edit] ISO 764 magnetic resistant watches standard The international standard ISO 764 Horology -- Magnetic resistant watches defines the resistance of watches to magnetic ... |
|
| 主題:[分享]手錶受磁...買了一台退磁機(已補圖)~~ | |
|
發表於: 星期五 2009-08-07 13:07
>這一台目前台灣買得到嗎? 有的話我也想買一台!! <
Sorry, I live in Hong Kong。 http://i146.photobucket.com/albums/r271/0925photo/Timegrapher-1.jpg Before demagnetizing, you better check the ... |
|
| 主題:[分享][報到]馬伕工會-Seamaster | |
|
發表於: 星期三 2009-08-05 09:50
The antimagnetic soft iron cover inside my son's Seamaster 300M:
http://i146.photobucket.com/albums/r271/0925photo/DSCF2260.jpg http://i146.photobucket.com/albums/r271/0925photo/DSCF2253.jpg |
|
| 主題:[報到]住在香港的朋友請進來 | |
|
發表於: 星期五 2009-07-24 10:36
一些怪異的老人家，往往喜歡做一些不近人情事。
在日本，我經常在如廁和浸溫泉時，見女清潔工，出、入打掃。 香港歡迎您！ |
|
| 主題:[報到]住在香港的朋友請進來 | |
|
發表於: 星期五 2009-07-24 10:30
很高興有這麼一個園地.可與香港的朋友交流.
藉著這一版. 小弟有個心中有關香港習俗的疑問.想請教一下諸位香港的朋友. 此說來話長.還請諸位見諒 7月初. 小弟帶著妻女至香港旅遊數日. ㄧ日.妻子正於IFC諸� ... |
|
| 主題:預算7萬 BALL OMEGA TAG 該選哪個? | |
|
發表於: 星期六 2009-07-11 15:00
Omega Seamaster has an antimagnetic soft iron cover in side its case:
http://i146.photobucket.com/albums/r271/0925photo/DSCF2260.jpg http://i146.photobucket.com/albums/r271/0925photo/DSCF2253.jpg |
|
| 主題:BERGEON 放大鏡倍數問題...有照片 | |
|
發表於: 星期日 2009-06-28 00:16
The ratio for 2611 is 6 times and the focusing distance is 1.5 inches:
http://i146.photobucket.com/albums/r271/0925photo/2611.jpg |
|
| 主題:歐米茄 Aqua Terra 海馬不繡鋼錶帶 | |
| 主題:刪~~ | |
|
發表於: 星期四 2009-05-28 10:29
ringowang 兄,
如果冇"呔盤匙"，底蓋難上緊。 那天那個老師傅用的類似像前輩您黃色盒子的那種... 不過它是黑色的..中間的套筒是中空的... 而且分別有幾支不同Size用的...!! 聽你形容好似內地製品ㄟ.... ... |
|
| 主題:刪~~ | |
|
發表於: 星期三 2009-05-27 16:26
ringowang 兄,
如果冇"呔盤匙"，底蓋難上緊。 http://i146.photobucket.com/albums/r271/0925photo/Horotec_case_opener.jpg |
|
| 主題:刪~~ | |
| 主題:[分享]SD~forever | |
|
發表於: 星期四 2009-05-14 08:51
實用、耐操，三年來除洗澡外不離手，精準、穩定如初：
http://i146.photobucket.com/albums/r271/0925photo/Seadweller05062008.jpg |
|
| 主題:誠心請教116660問題 | |
| 主題:請問19mmx18mm的錶帶跟折疊扣哪裡找？ | |
| 主題:金魚眼(放大鏡) | |
|
發表於: 星期三 2009-04-29 12:49
Solvent to dissolve the UV glue applied onto the cyclops of crystal glass:
http://www.freepatentsonline.com/6518230.html |
|
| 主題:金魚眼(放大鏡) | |
|
發表於: 星期三 2009-04-29 12:34
retrn 兄,
請恕言語上有所沖撞! 手表是自己的，其實您想怎樣處理，與旁人無關，但如果您在公眾場所配帶，卻對設計者和品牌形象有所影響。 |
|
| 主題:金魚眼(放大鏡) | |
|
發表於: 星期三 2009-04-29 11:43
任何改變 Rolex 手表內、外結構或面貌的行為都會令這百年高質名牌表變假，帶假 Rolex 是對 Rolex 品牌和帶真 Rolex 表的人們的侮辱，retrn兄請三思!
|
|
| 主題:[問題] 擒縱叉上油問題 | |
|
發表於: 星期六 2009-04-18 00:38
For ETA2824:
http://i146.photobucket.com/albums/r271/0925photo/PalletEntryLubePoint.jpg |
|
| 主題:[分享]手錶受磁...買了一台退磁機(已補圖)~~ | |
|
發表於: 星期日 2009-04-12 08:39
Mr. Otto Frei has a similar one but cheaper in price:
http://www.ofrei.com/page_220.html |
|
| 主題:[分享]手錶受磁...買了一台退磁機(已補圖)~~ | |
|
發表於: 星期日 2009-04-12 08:36
樓上0925地大大....請問您這台消磁機哪買地...我在Y拍都找不到....方便PM小弟嗎？ 感謝
$1820 是港幣價，5年前在香港南興買： http://www.nam-hing.com/ Mr. Otto Frei has a similar one but cheaper in ... |
|
| 主題:[分享]手錶受磁...買了一台退磁機(已補圖)~~ | |
|
發表於: 星期六 2009-04-11 21:59
黑馬 300m 表殼內應有防磁軟鐵蓋。
Bergeon 效果較好： http://i146.photobucket.com/albums/r271/0925photo/DSCF2239-1.jpg |
|
| 主題:[問題]16600錶面的SWISS MADE | |
|
發表於: 星期五 2009-03-27 07:55
我的3年前買，29,30 & 31, 32 較短。
http://i146.photobucket.com/albums/r271/0925photo/Seadweller05062008.jpg 想要請教大大字頭為．．． Z |
|
| 主題:[問題]16600錶面的SWISS MADE | |
| 主題:[問題]16600錶面的SWISS MADE | |
|
發表於: 星期四 2009-03-26 00:13
我的3年前買，29,30 & 31, 32 較短。
http://i146.photobucket.com/albums/r271/0925photo/Seadweller05062008.jpg |
|
| 主題:磁化的機率… | |
|
發表於: 星期六 2008-11-22 10:08
http://i146.photobucket.com/albums/r271/0925photo/DSCN2252.jpg
|
|
| 主題:磁化的機率… | |
|
發表於: 星期六 2008-11-22 10:06
請問市面上有沒有賣什麼工具可以自己消磁阿
要不然假如每次受磁都要拿去錶店很麻煩 如果機械錶不用停下來不運轉 下次要戴在重新上練的話 這樣之前的受磁會消失嗎?? http://i146.photobucket.com/albums/r271/ ... |
|
| 主題:[請教]錶耳無孔，又無專業工作，怎麼拆錶帶，請問可有專業工具照 | |
|
發表於: 星期五 2008-10-31 11:17
用這個..
http://74.53.106.99/modules/coppermine/albums/userpics/18836/2007616192817273.jpg 只是我也不知道去那裡買.. :oops:It is less than HK $1000. You may get one via the following website: ... |
|
| 主題:海馬泡海水 | |
|
發表於: 星期二 2008-10-28 09:00
Posted by Omega website:
Preventive Maintenance What should I do to ensure that my watch continues to provide excellent service for many years? Magnetic fields: avoid placing your watch on s ... |
|
| 主題:[問題]寶磯游絲? | |
|
發表於: 星期三 2008-10-08 17:07
Glucydur balance for comparison.
Copied from the internet: http://i146.photobucket.com/albums/r271/0925photo/Glucydurbalance.jpg |
|
| 主題:[問題]寶磯游絲? | |
|
發表於: 星期三 2008-10-08 16:33
Copied from the internet:
The overcoil design of the "Breguet hairspring" is not often used in contemporary wristwatches because of its susceptibility to shock, but it prevents shifting of the cen ... |
|
| 主題:石英手錶的疑問 | |
|
發表於: 星期三 2008-10-08 12:04
http://i146.photobucket.com/albums/r271/0925photo/DSCF0241.jpg
|
|
| 主題:錶面跟錶扣花了 | |
| 主題:勞力士調整時間,錶冠不好拉出 | |
|
發表於: 星期三 2008-09-24 15:01
If my understanding is correct, there are totally 4 "O" rings on the case tube (x 1 PC), inside the case tube (x 2 PCS) and inside the crown (x 1 PC).
Sorry, no. 703 is the correct photo: http:/ ... |
|
| 主題:勞力士調整時間,錶冠不好拉出 | |
|
發表於: 星期三 2008-09-24 12:41
If my understanding is correct, there are totally 4 "O" rings on the case tube (x 1 PC), inside the case tube (x 2 PCS) and inside the crown (x 1 PC).
|
|
| 主題:Re: 勞力士調整時間,錶冠不好拉出 | |
|
發表於: 星期三 2008-09-24 12:34
勞力士調整時間,調整分針時,使出很大力氣
依然無法將錶冠拉至定位,必須再多旋轉兩下順勢拉出還不一定成功 現在服役的116710.116201都是如此,深怕錶冠整體拉出來. 
不知各位前輩是否也如此,還是我方式不對 :ro ... |
|
| 主題:有人也想各個品牌都搜集一只錶嗎？ | |
|
發表於: 星期三 2008-09-24 11:30
剛開始玩錶的我也會這麼想
但玩了幾年錶,以及從前輩的建議後發現 這樣的玩法是跟錢過不去 想想以後的保養及維修的費用 避開一些吸血集團的產品才是真的 我現在只玩勞力士. 我沒有多餘的財力能什麼都收一隻. ... |
|
| 主題:[請教] 正考慮要不要買 Stowa Airman Automatic w/o Logo | |
|
發表於: 星期一 2008-09-15 23:39
請問2824, 6497機芯 各別的錶徑是多少?2824 = 11.5 ligne = Φ 25.6mm
6497 = 16.5 ligne = Φ 36.6mm |
|
| 主題:[問題]我是否被騙了 （別亂碼啦） | |
|
發表於: 星期五 2008-09-05 12:51
Miyota movements are being sold from US$10 to US$35. It is better than PRC product.
|
|
| 主題:請問可以買到MeinsterSinger的網上商店 | |
|
發表於: 星期四 2008-09-04 16:37
This one:
Edition 2007 Dial/hands: Dial with a silver or golden circle of numbers, Blued steel or polished number appliques Functions: Single-handed watch Movements: Sellita SW200 Swiss automa ... |
|
| 主題:請問可以買到MeinsterSinger的網上商店 | |
|
發表於: 星期四 2008-09-04 13:10
I like the one hand watch design. I think it is better than EPOS:
http://i146.photobucket.com/albums/r271/0925photo/41mm6498.jpg |
|
| 主題:請問可以買到MeinsterSinger的網上商店 | |
|
發表於: 星期四 2008-09-04 12:34
謝謝!!!
試了良� 直接寫mail給店家, 英文OK. 台灣電匯即可.http://www.meistersinger.net/index127.htm |
|
| 主題:[請教]洗油的方法與技巧 | |
|
發表於: 星期日 2008-08-31 09:49
Timezone watch school (US $50 for each "distance learning watch assemble/disassemble training course"):
http://www.timezonewatchschool.com/WatchSchool/ |
|
| 主題:[問題]Seiko之機芯零件何處買?? | |
|
發表於: 星期五 2008-08-29 14:27
Try MIYOTA:
http://www.ofrei.com/page625.html |
|
| 主題:請教: 手錶不使用時的收藏方式 | |
| 主題:請問海馬走太快有辦法調整嘛？ | |
|
發表於: 星期三 2008-08-27 13:47
Typo mistake:
I try to explain in a simple way: 1) A microphone is installed inside the fixture 2) The "noise" of the watch is picked up by the microphone 2) Through amplification, selection, ... |
|
| 主題:請問海馬走太快有辦法調整嘛？ | |
|
發表於: 星期三 2008-08-27 13:40
http://i146.photobucket.com/albums/r271/0925photo/Timegrapher-1.jpg
http://i146.photobucket.com/albums/r271/0925photo/Timegrapher.jpg "用了個儀器檢測快了多少（我是第一次看到這個儀器，覺得很神奇� ... |
|
| 主題:請教: 手錶不使用時的收藏方式 | |
|
發表於: 星期三 2008-08-27 10:49
My point of view:
1) If you put your watches (diver watches are not included) in normal (non-electrical type) 防潮箱 + silica gel, the humidity inside will be very low (≤ 45%). the lubricant ... |
|
| 主題:[請教][請教]請問eta 2824 機芯 日期盤如何更換 問題? | |
|
發表於: 星期三 2008-08-27 09:19
Distance learning courses for watch repair (US $50 only for each enrolment):
http://www.timezonewatchschool.com/WatchSchool/ |
|
| 主題:[問題]請問龍頭該鎖多緊?另外請問RSC有沒有提供測錶機的服務? | |
|
發表於: 星期二 2008-08-26 13:56
This one is less than HK$5000:
http://i146.photobucket.com/albums/r271/0925photo/Timegrapher-1.jpg |
|
| 主題:MIDO的2836-2机芯的温度性能 | |
|
發表於: 星期四 2008-08-21 16:24
"对这几种档次的机芯，有没有什么标记可识别呢。"
If the word "chronometer" is stamped on the dial of your watch, you should believe the movement of you ... |
|
| 主題:[分享] 我為何沉醉於勞力士的原因 | |
|
發表於: 星期四 2008-08-21 14:31
Copied from the internet -----
Technical sheet for the 904L Steel: According to a 2006 Rolex advertisement entitled: "SOME STEEL IS MORE AMBITIOUS THAN OTHERS: Only Rolex uses 904L steel for its ... |
|
| 主題:MIDO的2836-2机芯的温度性能 | |
|
發表於: 星期三 2008-08-20 16:06
ETA 2824-2 11 1/2 ligne, hack, etachron regulator, (same basis as 2801-2, 2804-2, 2836-2)(C) [adjustments: positions, average rate, max variation, isochronism]
Standard: nickel plated with Etachoc s ... |
|
| 主題:[請教]錶耳無孔，又無專業工作，怎麼拆錶帶，請問可有專業工具照 | |
|
發表於: 星期三 2008-08-20 15:58
小弟本來是想買Bergeon 6825....
BUT.....WHY? The web say "Does not work on Rolex? " $128.00 Bergeon 6825 Pliers to Fit Spring Bars http://74.53.106.99/modules/coppermine/albums/userpics/1 ... |
|
| 主題:請教: 手錶不使用時的收藏方式 | |
|
發表於: 星期三 2008-08-20 11:47
"手錶不使用時的收藏方式"
If not in use, put them in individual ZIPPER bag. |
|
| 主題:請教: 手錶不使用時的收藏方式 | |
|
發表於: 星期三 2008-08-20 10:42
自動上鍊座 ---
This one is good: http://i146.photobucket.com/albums/r271/0925photo/AFwatchwinderswitzerland.jpg http://www.schweizer-uhren.ch/n379733/i731197.html |
|
| 主題:[請教]錶耳無孔，又無專業工作，怎麼拆錶帶，請問可有專業工具照 | |
|
發表於: 星期六 2008-08-16 15:26
用這個..
http://74.53.106.99/modules/coppermine/albums/userpics/18836/2007616192817273.jpg 只是我也不知道去那裡買.. :oops:It is less than HK $1000. You may get one via the following website: ... |
|
| 主題:請問大黑馬有抗磁嗎 | |
|
發表於: 星期四 2008-08-14 14:46
FAQ posted by Omega website:
[Are Omega watches resistant to magnetic fields ? Yes. Omega watches are anti-magnetic in accordance with the definitions of the ISO 764 standard. This standard is based ... |
|
| 主題:BALL 剛推出一只飛行錶!!! | |
|
發表於: 星期四 2008-08-14 12:54
T < 25 is the previous standard for using Tritium as luminous material on watches.
This one is T100. Is the radiation still within the acceptable limit? |
|
| 主題:[問題]馬克16手動補弦會損壞表麼？ | |
|
發表於: 星期四 2008-08-14 09:05
All automatic watches are equiped with a "Clutch device" inside the mainspring barrel.
Copied from the internet: http://i146.photobucket.com/albums/r271/0925photo/rolexmainspring.jpg |
|
| 主題:[問題]有辦法自己消磁嗎? | |
|
發表於: 星期三 2008-08-13 08:57
Sorry, the grey one is more expensive. This is the correct photo:
http://i146.photobucket.com/albums/r271/0925photo/ofrei-118.jpg |
|
| 主題:[問題]有辦法自己消磁嗎? | |
|
發表於: 星期三 2008-08-13 08:52
This one is less than HK $200. Made in Swiss:
http://i146.photobucket.com/albums/r271/0925photo/demagnetizer.jpg |
|
| 主題:[問題]請問龍頭該鎖多緊?另外請問RSC有沒有提供測錶機的服務? | |
|
發表於: 星期二 2008-08-12 14:02
The case tube is screwed onto the oyster case by using a special tool.
Copied from the internet: http://i146.photobucket.com/albums/r271/0925photo/roltubenewold.gif |
|
| 主題:[買錶]16610 or 16600哪個好? | |
|
發表於: 星期二 2008-08-12 10:19
The helium escape valve is made of titanium:
http://i146.photobucket.com/albums/r271/0925photo/Heliumescapevalve.jpg |
|
| 主題:對鋼錶帶過敏，有什麼好解法嗎？ | |
|
發表於: 星期四 2008-08-07 15:15
For elegant wactches, you may try silicone rubber strap or kevlar strap.
|
|
| 主題:天氣那麼熱，汗流那麼多......大家用什麼方法洗勞呢？ | |
|
發表於: 星期四 2008-08-07 08:51
Preventive Maintenance posted by Omega website:
What should I do to ensure that my watch continues to provide excellent service for many years? 1)Magnetic fields: avoid placing your watch on sp ... |
|
| 主題:求救 龍頭沒有鎖 水會不會流進去? | |
|
發表於: 星期一 2008-08-04 01:50
For your reference:
http://www.watchbus.com/modules.php?name=Forums&file=viewtopic&t=27956 Copied from the internet: Acero is Spanish for Steel Oro amarillo means Yellow Gold Oro blanco ... |
|
| 主題:推薦便宜手上鏈錶款 | |
|
發表於: 星期五 2008-08-01 13:48
Cyma with ETA 6498 movement is only US $329:
http://www.ofrei.com/page1284.html |
|
| 主題:請問高手們railmaster的2403值不值得購入? | |
|
發表於: 星期五 2008-08-01 09:57
Not as good as Rolex but it is still a good quality watch:
四臂環形合金擺輪 -- uses "Balance cock", similar to Rolex 14270 (not 114270 which uses balance bridge) 由擺輪上的兩顆螺絲微調快慢 -- simi ... |
|
| 主題:請問哪兒有賣19mm收14mm的錶帶? | |
|
發表於: 星期四 2008-07-31 12:38
Sorry,
Couldn't find 19mm width strap for 14mm buckle. |
|
| 主題:請問哪兒有賣19mm收14mm的錶帶? | |
| 主題:請推薦1到3萬元之間的機械錶. | |
|
發表於: 星期四 2008-07-31 11:57
If brand name is not your concern, try ASTOR-43-VIP(Swiss Made 43 mm Skeleton 6497 movement):
US $396.00 http://www.ofrei.com/page1284.html |
|
| 主題:[買錶]16610 or 16600哪個好? | |
|
發表於: 星期五 2008-07-18 10:37
http://i146.photobucket.com/albums/r271/0925photo/Seadweller05062008.jpg
|
|
| 主題:放大鏡 | |
|
發表於: 星期二 2008-07-15 13:08
For watch inspection and repair, 4X is enough:
http://i146.photobucket.com/albums/r271/0925photo/4Xmagnifier.jpg |
|
| 主題:[討論]大家平時都喜歡喝什麼酒了? | |
|
發表於: 星期日 2008-07-13 11:16
"想請問喝過18年的巴友
它們兩瓶價格差異蠻大的 口感真的差很多嗎" -- 12年 is too fresh, the smell of malt is strong. 18年 is more mature but a bit expensive. I would take The Famous Grouse 15 years, ... |
|
| 主題:[問題]請問TUDOR的錶好嗎? | |
|
發表於: 星期日 2008-07-06 03:24
http://i146.photobucket.com/albums/r271/0925photo/Cannonpinion.jpg
"如果時常進行時間的調整,這樣會不會對某些零件會特別的磨耗" --- The friction between #2 cannon pinion and #3 cannon pinion drive wh ... |
|
| 主題:請教同好OCEAN STAR 如何卸下錶冠? | |
|
發表於: 星期六 2008-07-05 09:42
AF supplies male & female stem extender:
http://www.afswitzerland.com/pn/Products/Fourniture.pdf |
|
| 主題:自動上鍊機白買了? | |
|
發表於: 星期一 2008-06-23 00:31
The original price for this watch winder (from AF Switzerland) is HK ~$1450.
A voltage regulator is added to stabilize the circuit for both DC and AC input: http://i146.photobucket.com/albums/r ... |
|
| 主題:自動上鍊機白買了? | |
|
發表於: 星期日 2008-06-22 23:49
This one is good. It turns clockwise or counterclockwise one cycle per one minute.
http://i146.photobucket.com/albums/r271/0925photo/AFwatchwinderswitzerland.jpg I modified the turntable from 2 ... |
|
| 主題:[問題]請問龍頭該鎖多緊?另外請問RSC有沒有提供測錶機的服務? | |
|
發表於: 星期五 2008-06-20 12:58
Datejust uses "Twinlock crown". No need to "鎖很緊".
http://i146.photobucket.com/albums/r271/0925photo/RolexCrownP03.jpg |
|
| 主題:[問題]請問龍頭該鎖多緊?另外請問RSC有沒有提供測錶機的服務? | |
|
發表於: 星期五 2008-06-20 12:52
http://i146.photobucket.com/albums/r271/0925photo/Timegrapher.jpg
http://i146.photobucket.com/albums/r271/0925photo/Waterprooftester.jpg Fill the jar with water to the marked line in the jar. Hang ... |
|
| 主題:[問題]請問龍頭該鎖多緊?另外請問RSC有沒有提供測錶機的服務? | |
|
發表於: 星期五 2008-06-20 12:50
http://i146.photobucket.com/albums/r271/0925photo/Timegrapher.jpg
http://i146.photobucket.com/albums/r271/0925photo/Waterprooftester.jpg Fill the jar with water to the marked line in the jar. Hang ... |
|
| 主題:救命!!! 剛剛發生一個問題 | |
|
發表於: 星期三 2008-06-18 12:44
Information copied from the internet:
http://i146.photobucket.com/albums/r271/0925photo/KWUnassembledDscn15261.jpg http://i146.photobucket.com/albums/r271/0925photo/keyless_works_winding.jpg Th ... |
|
| 主題:請教同好OCEAN STAR 如何卸下錶冠? | |
|
發表於: 星期三 2008-06-18 10:15
請教各位: 那兒(台北)可以找到 兩節/公母式 的龍蕊stem?
有單賣這類零件嗎? 想說就將這mido錶的stem換啦!免得下回還要硬挖硬拔的卸stem 謝謝啦!"那兒(台北)可以找到 兩節/公� ... |
|
| 主題:[貼圖] 接 龍 --> 你 今 天 戴 甚 麼 錶 ? ^_^ | |
|
發表於: 星期二 2008-06-17 10:56
I'm a hairy man:
http://i146.photobucket.com/albums/r271/0925photo/DSCF2741.jpg http://i146.photobucket.com/albums/r271/0925photo/Seadweller05062008.jpg |
|
| 主題:請omega達人幫幫忙!!! | |
|
發表於: 星期五 2008-06-13 11:50
Movement numbers and earliest production year for Omega watches:
http://www.omegawatches.com/cu_vintage/img/movement.pdf |
|
| 主題:請教同好OCEAN STAR 如何卸下錶冠? | |
|
發表於: 星期三 2008-06-11 12:00
Mr. watchsolo,
If it is only water resistant to 50 meters and is having a see-through caseback, I think the caseback is a snap-on type. Post a photo up here, let's see which is the appropriate me ... |
|
| 主題:請教同好OCEAN STAR 如何卸下錶冠? | |
|
發表於: 星期三 2008-06-11 09:18
Wrong photo enclosed!
Sorry, the above website does not show you the details. The following is copied from Timezone Watch School: With many watches, it is advisable to place the crown in the ha ... |
|
| 主題:請教同好OCEAN STAR 如何卸下錶冠? | |
|
發表於: 星期三 2008-06-11 09:14
Sorry, the above website does not show you the details. The following is copied from Timezone Watch School:
With many watches, it is advisable to place the crown in the hand-setting position before ... |
|
| 主題:請教同好OCEAN STAR 如何卸下錶冠? | |
| 主題:這只古董潛水錶夜光塗裝的怪異理由何在 | |
|
發表於: 星期日 2008-06-08 21:54
The heart of a Certina
Since 1888, Certina has maintained an enviable reputation for its excellent watches and reliable movements. From the time of its integration into the SMH (today's Swatch Group) ... |
|
| 主題:這只古董潛水錶夜光塗裝的怪異理由何在 | |
| 主題:[請教][請教]龍頭上的皇冠下的圓點 | |
|
發表於: 星期六 2008-06-07 10:45
Triplock crown that is being used by 16600, 16610, Yachtmaster & watches with protective "arch":
http://i146.photobucket.com/albums/r271/0925photo/RolexCrownP02.jpg |
|
| 主題:[請教][請教]龍頭上的皇冠下的圓點 | |
|
發表於: 星期六 2008-06-07 10:35
Sorry, typo error!
This is also twinlock crown: http://i146.photobucket.com/albums/r271/0925photo/RolexCrownP03.jpg Only No. 703 is Triplock crown that is being used by 16600, 16610, Yachtmaste ... |
|
| 主題:[請教][請教]龍頭上的皇冠下的圓點 | |
|
發表於: 星期六 2008-06-07 10:30
Information copied from the following website:
http://www.horologist.com/rolex_crown.htm http://i146.photobucket.com/albums/r271/0925photo/RolexCrownP01.jpg Twinlock crown(being used by Air K ... |
|
| 主題:[請教][請教]龍頭上的皇冠下的圓點 | |
|
發表於: 星期六 2008-06-07 00:07
Copied from the internet:
Acero is Spanish for Steel Oro amarillo means Yellow Gold Oro blanco means White Gold Platino means Platinum Coronas means Crowns http://i146.photobucket.com/albums/r ... |
|
| 主題:[問題]iwcPortuguese544401 | |
|
發表於: 星期五 2008-06-06 10:23
Sorry, The following is the correct expression:
Rolex Oyster movements use 寶璣式游絲: http://i146.photobucket.com/albums/r271/0925photo/rolex223507.jpg Most ETA movements use normal desi ... |
|
| 主題:[問題]iwcPortuguese544401 | |
|
發表於: 星期五 2008-06-06 10:19
"寶璣式游絲是指他有部份零件是用寶璣的嗎??"
Rolex Oyster movements use 寶璣式游絲: http://i146.photobucket.com/albums/r271/0925photo/BalanceSpringExamining.jpg Most ETA movements use normal de ... |
|
| 主題:請教IWC葡萄牙啄木鳥七日鍊機芯好~或OMEGA,8501機芯好 | |
|
發表於: 星期四 2008-06-05 16:06
KIF shock absorber on escape wheel:
http://i146.photobucket.com/albums/r271/0925photo/KIFshockabsorberonescapewheel.jpg |
|
| 主題:請教IWC葡萄牙啄木鳥七日鍊機芯好~或OMEGA,8501機芯好 | |
|
發表於: 星期四 2008-06-05 13:19
Movement quality:
Rolex Oyster movement (it has shock absorber on escape wheel) > Omega 8501 > IWC葡萄牙啄木鳥七日鍊機芯 |
|
| 主題:My IWC BP | |
|
發表於: 星期三 2008-06-04 16:25
"發現錶殼上有一點點擦傷，雖然只是一小點，但誰叫自己當時買沒看清楚，也只好接受，但不曉得大家有沒有方法，能把那個小擦傷，利用擦拭布或是什麼方法，還原之前直條紋的打磨呢?雖然錶戴了，一定會有刮傷，但誰叫我 ...
|
|
| 主題:請教諸位大大如合抉擇 | |
| 主題:男人就是要夠MAN？ | |
|
發表於: 星期三 2008-06-04 10:18
乾脆掛鐘算了 It does not look good if the width of a man's wrist is smaller than the watch he wears, but it is sexy on girls. |
|
| 主題:買錶前一問,同軸與非同軸 | |
|
發表於: 星期四 2008-05-29 10:52
Period of overhaul:
Co-axial movement -- about 8 years Other movement -- 4 to 5 years |
|
| 主題:決定入手百年靈,請問Cockpit大三針的機芯是用ETA那個型號改的? | |
|
發表於: 星期六 2008-05-24 15:31
Typo problem:
I try to answer your question, but don't blame me if my answer is wrong: ETA 2824-2 is a good quality 25 jewels movement (a typical COSC grade caliber is only ~US $13X), but it i ... |
|
| 主題:決定入手百年靈,請問Cockpit大三針的機芯是用ETA那個型號改的? | |
|
發表於: 星期六 2008-05-24 15:29
I try to answer your question, but don't me if my answer is wrong:
ETA 2824-2 is a good quality 25 jewels movement (a typical COSC grade caliber is only ~US $13X), but it is ~5mm thick and the roto ... |
|
| 主題:決定入手百年靈,請問Cockpit大三針的機芯是用ETA那個型號改的? | |
|
發表於: 星期六 2008-05-24 10:50
If you are asking for Cockpit big date, it uses caliber 49 which is ETA 2896.
Cal 49 ETA 2896 42 hrs Auto Large Date Information for your reference: http://home.earthlink.net/~timchi/site ... |
|
| 主題:是不是該再衝一隻Hamilton? | |
|
發表於: 星期五 2008-05-23 23:01
1. Rolex 16610
2. Omega大海馬 3. Longine征服者 Hamilton is good, but not as good as Longine征服者. Longine征服者 is good, but not as good as Omega大海馬. Omega大海馬 is good, but not as ... |
|
| 主題:是不是該再衝一隻Hamilton? | |
|
發表於: 星期五 2008-05-23 17:16
Stop looking for low level watches. Safe more money to buy:
1. Rolex 16610 |
|
| 主題:想要請問關於消磁的問題 | |
|
發表於: 星期五 2008-05-23 14:37
Another type of demagnetizer:
http://i146.photobucket.com/albums/r271/0925photo/demagnetizer.jpg |
|
| 主題:想要請問關於消磁的問題 | |
|
發表於: 星期四 2008-05-22 09:55
I try to answer your question, but don't blame me if my answer is wrong. Since all "demagnetizer" is contructed as the following(some devices may use a ferrite magnetic core instead of a transformer), ...
|
|
| 主題:[調查]第一只入手的勞力士 | |
| 主題:[問題]16610準度問題 | |
|
發表於: 星期二 2008-05-20 13:28
A jewelled needle compass made by Bergeon -- it is used to check whether a watch is magnetized.
Copied from the internet: http://i146.photobucket.com/albums/r271/0925photo/fb2820.jpg |
|
| 主題:[問題]16610準度問題 | |
|
發表於: 星期二 2008-05-20 09:12
Some demagnetizers are cheap. I bought this one in less than HK $150. It is a simple electrical device -- The AC cord is connected to a small transformer. By instantly pressing the switch button which ...
|
|
| 主題:二選一，114270 還是14060M。 | |
| 主題:手錶怪怪的 | |
|
發表於: 星期六 2008-05-17 15:15
I think the stem of the keyless mechanism is a bit shorter than requested (the length is not correctly adjusted due to production flaw) or the keyless mechanism misaligned. The watch should be replace ...
|
|
| 主題:[問題]16610準度問題 | |
|
發表於: 星期五 2008-05-16 14:13
會不會是受磁了-- A balance wheel equiped with a magnetized hairspring will run very fast.
A stable +7 to +8 seconds/day is off COSC standard. It requires a slight adjustment only (Of course with a sp ... |
|
| 主題:[問題]16610準度問題 | |
|
發表於: 星期五 2008-05-16 13:07
Rolex uses Microstella balance and balance bridge on all her updated oyster watches. They can be precisely adjusted
Photos copied from the internet: http://i146.photobucket.com/albums/r271/0925pho ... |
|
| 主題:請問一下任何錶都會受磁嗎 | |
|
發表於: 星期五 2008-05-16 11:16
"Similar" to the operation of the balance wheel in a mechanical watch, 機械石英電子錶 has a small magnetic gear wheel activated by a "pulse generator" via a magnetic coil. They are sensitve to magneti ...
|
|
| 主題:6月的生日禮物送老公.幫幫我 | |
|
發表於: 星期四 2008-05-15 14:17
14000M, 114270 & 14060M share the same movement:
Caliber 3130 (copied from oysterworld): http://i146.photobucket.com/albums/r271/0925photo/Kal3130--AirKing.jpg |
|
| 主題:調整時間秒針會停嗎? | |
|
發表於: 星期四 2008-05-15 12:44
"有.無停秒裝置並不代表機心等級的高低"
for example? => 6497 & 6498 basic movement 秒針會停止Movement with a hack mechanism which "locks" the balance wheel when the stem is pulled out(copied from ... |
|
| 主題:壞人海被帶爛了.... | |
|
發表於: 星期五 2008-05-09 16:40
>中国制的仿沛真的是很泛滥 <
Lo Wu commercial city shopping mall, Shenzhen, PRC -- ¥150 to ¥180 |
|
| 主題:錶面刮傷是否在保固範圍內? | |
|
發表於: 星期五 2008-05-09 16:03
送去錶行的結論是, 無法去除....最後換了鏡片...^_^Free of charge, right?
|
|
| 主題:請教關於 Automatic 670的機心及保養問題 | |
|
發表於: 星期五 2008-05-09 12:44
An overhaul(洗油) shall include the following(copied from Omega website):
These are the main steps of a complete maintenance service: 1 Open the case, remove the dial and the movement 2 Disa ... |
|
| 主題:一些鐘錶知識~增廣見聞 | |
|
發表於: 星期五 2008-05-02 17:49
US$50 for a watch repairing course:
http://www.timezonewatchschool.com/WatchSchool/ |
|
| 主題:一些鐘錶知識~增廣見聞 | |
| 主題:OMEGA音叉表評價如何? | |
|
發表於: 星期五 2008-05-02 17:34
Two types of Accutron movement are being sold by Mr. Otto Frei at US$289:
http://www.ofrei.com/page_183.html |
|
| 主題:6r15與2824比較？ | |
|
發表於: 星期四 2008-05-01 10:27
2824-2 COSC grade caliber:
http://i146.photobucket.com/albums/r271/0925photo/2824-2.jpg |
|
| 主題:自動上鍊機 | |
|
發表於: 星期四 2008-05-01 09:40
All automatic watches nowadays are having a "clutch" design on the mainspring inside the barrel:
http://i146.photobucket.com/albums/r271/0925photo/rolexmainspring.jpg |
|
| 主題:OMEGA音叉表評價如何? | |
|
發表於: 星期三 2008-04-30 19:10
The following link is good for you:
http://www.timezone.com/library/horologium/horologium631672882451976629 |
|
| 主題:自動上鍊機 | |
|
發表於: 星期三 2008-04-30 19:04
>那如果動能顯示滿了
還是戴在手上走路 跑跑跳跳 會不會也有過度上鍊的問題阿?? < All automatic watches nowadays are having a "clutch" design on the mainspring inside the barrel. |
|
| 主題:貴金屬手錶的保養 | |
|
發表於: 星期二 2008-04-29 11:21
Copied from Omega website:
Preventive Maintenance What should I do to ensure that my watch continues to provide excellent service for many years? Magnetic fields: avoid placing your watch on ... |
|
| 主題:老海馬 | |
|
發表於: 星期五 2008-04-25 10:25
Mr. yngwiemore,
Beautiful pictures! I guess yours is younger than mine. Unlike IWC, Omega seldom mentions the antimagnetic power of her Seamasters. Even my 16600 does not have this soft iron co ... |
|
| 主題:我想買表該注意什麼? | |
|
發表於: 星期四 2008-04-24 13:49
A fake watch usually rough, poor finished and dirty.
After all important points have been checked, use a 8X (or above) loupe to check the finishing of dial and hands (check the pad-printing qualit ... |
|
| 主題:老海馬 | |
|
發表於: 星期四 2008-04-24 12:58
Caliber 1120:
http://i146.photobucket.com/albums/r271/0925photo/Seamaster.jpg |
|
| 主題:老海馬 | |
|
發表於: 星期四 2008-04-24 12:52
Mr. yngwiemore,
Yours and mine were born at the same period of time: The movement of this model is the Omega 1109, it is identical to the Omega 1108 caliber, and almost identical to the Omega 11 ... |
|
| 主題:請問調手錶時間應該順時針轉, 還是亦時針轉呢 | |
|
發表於: 星期四 2008-04-24 11:28
Sorry,
http://i146.photobucket.com/albums/r271/0925photo/Cannonpinion.jpg |
|
| 主題:請問調手錶時間應該順時針轉, 還是亦時針轉呢 | |
|
發表於: 星期四 2008-04-24 11:27
IMG]http://i146.photobucket.com/albums/r271/0925photo/Cannonpinion.jpg[/IMG]
|
|
| 主題:請問調手錶時間應該順時針轉, 還是亦時針轉呢 | |
|
發表於: 星期四 2008-04-24 11:18
There is a "clutch" device between the "Cannon pinion drive wheel" and the "Minute wheel". Don't adjust the hour and minute hands too often (that means several times a day) in order to prevent slippag ...
|
|
| 主題:小的想買錶.請給小第一些意見 | |
|
發表於: 星期四 2008-04-24 10:06
Try this one: Swatch automatic ETA 2842 movement w/date -- US$78
http://www.ofrei.com/page1040.html |
|
| 主題:老海馬 | |
|
發表於: 星期四 2008-04-24 09:12
Sorry:
http://i146.photobucket.com/albums/r271/0925photo/OmegaSeamaster120M1993.jpg |
|
| 主題:老海馬 | |
|
發表於: 星期四 2008-04-24 09:08
This one was manufactured in 1993:
IMG]http://i146.photobucket.com/albums/r271/0925photo/OmegaSeamaster120M1993.jpg[/IMG] |
|
| 主題:錶面刮傷是否在保固範圍內? | |
|
發表於: 星期四 2008-04-24 08:58
The sapphire glass of 16600 is thicker than other Rolex watches (except Deep Sea). I've been wearing it for years.
I have a friend who broke the glass of his Air King within the warranty period. He ... |
|
| 主題:錶面刮傷是否在保固範圍內? | |
| 主題:外型,品牌,機芯,材質,功能,價錢,保值,保養.甚麼是您選錶的順序呢 | |
| 主題:想請各位達人幫我看這支勞 | |
|
發表於: 星期三 2008-04-23 09:06
Get one equiped with a sapphire crystal glass + balance bridge (manufactured on or after 2001 with the prefix -- K, Y, F, D, Z or M).
Caliber 3130 for Air King: http://www.oysterworld.de/Kaliber/K ... |
|
| 主題:新手發問-這樣的scvs003可以算瑕疵品嗎 | |
|
發表於: 星期二 2008-04-22 11:31
請問這兩點算正常嗎? Normal, your watch has been properly adjusted to the COSC standard.
需問退換嗎? Don't expect too much while you have paid too little. |
|
| 主題:[問題] 為何旋緊錶冠的時候會有上鍊聲? | |
|
發表於: 星期五 2008-04-18 15:47
>看到圖片上有個 + - 的機構~ 大概就是調整這個吧!<
Yes, but if you don't have a Timegrapher, don't try to adjust yourself. Send your watch to SC for readjustment. |
|
| 主題:請問手上鍊手錶,上鍊方向相反會導制機蕊損壞嗎? | |
|
發表於: 星期五 2008-04-18 15:18
There are a number of reasons that cannot be clearly explained through estimation. Most probably the "click spring " of the keyless mechanism is damaged. Send it to Epos service center for repair.
... |
|
| 主題:[問題] 為何旋緊錶冠的時候會有上鍊聲? | |
|
發表於: 星期五 2008-04-18 13:03
ETA 2824-2 movement is equiped with a wheel gear for hand-winding. It is normal.
>同是2824-2 的浪琴...一天誤差竟13秒左右< ± 10 seconds/day is normal for non-COSC grade Swiss made watches. If it c ... |
|
| 主題:小弟新人,想請問2500機心問題. | |
|
發表於: 星期五 2008-04-18 11:12
Caliber 1120 is modified from the ETA2892-A2. It is the same as the previous 21 jewels 1108 & 1109 caliber except that 2 more jewels are added to replace the bushings that are used to support the pivo ...
|
|
| 主題:關於omega的一些機蕊問題 | |
|
發表於: 星期五 2008-04-18 10:35
Even the famous Rolex 116520 uses this "column wheel" construction design on her 4130 movement. Of course Rolex movement is a lot better when compared with stability, accuracy and reliability (Rolex u ...
|
|
| 主題:關於omega的一些機蕊問題 | |
|
發表於: 星期五 2008-04-18 09:37
3303 行 column wheel, 是 chronograph design movement 中的顶级。比 Omega 1861, Lemania 5xxx & 7xxx series 和 Valjoux 77xx 都强， PP, AD & VC use the same design.
|
|
| 主題:16600要停產了,? | |
|
發表於: 星期五 2008-04-18 09:16
>东方人手腕小的(6.5英寸或以下)，12点位拆一格至剩4格，6点位9格戴得很舒服。<
Sorry, wrong typo. The correct method is: 东方人手腕小的(6.5英寸或以下)，6点位拆一格至剩4格 ... |
|
| 主題:16600要停產了,? | |
|
發表於: 星期五 2008-04-18 09:12
http://i146.photobucket.com/albums/r271/0925photo/Seadweller.jpg
|
|
| 主題:16600要停產了,? | |
|
發表於: 星期五 2008-04-18 09:07
>我本來也想弄一支來玩, 可以怎麼戴就是不順手, 被那個厚厚的底蓋頂住就是不喜歡.<
东方人手腕小的(6.5英寸或以下)，12点位拆一格至剩4格，6点位9格戴得很舒服。 |
|
