[size=14] [/size]手上有支
MIDO OCEAN STAR dataday COMMONDER 透明錶背上有LC8269字眼
近期感覺擺輪轉動角度減小,載一整天晚上脫下放桌上只能再走4 到 5 小時左右.
想將機蕊拆卸DIY玩玩,但就是不知道拆卸錶冠的正確方法,怕胡亂挖拔會將龍心搞斷.
它是由錶鏡打開的結構.
請巴友指點. 先謝謝了!
| 發表人 | 內容 | ||
|---|---|---|---|
|
watchsolo
新進會員   |
|||
|
0925
中級會員  |
|||
|
0925
中級會員 |
發表於: 星期三 2008-06-11 09:14
Sorry, the above website does not show you the details. The following is copied from Timezone Watch School:
With many watches, it is advisable to place the crown in the hand-setting position before removing the stem, as this will secure the keyless works parts in the movement plate. The stem is removed by loosening the set lever screw a few turns (without removing it), or, as the photo, by depressing a sprung set-lever button . Both types will be just to the centerline of the stem on the top plate. Either action lifts the set lever post clear of the stem. The button (above left ) on our movement is held in the depressed position with a small screw driver or shapened pegwood while the stem is gently withdrawn from the movement. It is important that just enough pressure be applied to the button to release the stem, push too hard and you will likely dislodge parts in the keyless works. This is not a major problem if you are decasing the movement for complete service, but if the intent was a minor adjustment you will find you now have to disassemble the dial side to put things right. It is best to press the button while applying a gentle pull on the stem. That way you should feel the stem release and not press any further than necessary. The stem may also require a gentle, slight turn of the crown as it is being withdrawn --- 
|
||
|
0925
中級會員 |
發表於: 星期三 2008-06-11 09:18
Wrong photo enclosed!
Sorry, the above website does not show you the details. The following is copied from Timezone Watch School: With many watches, it is advisable to place the crown in the hand-setting position before removing the stem, as this will secure the keyless works parts in the movement plate. The stem is removed by loosening the set lever screw a few turns (without removing it), or, as the photo, by depressing a sprung set-lever button . Both types will be just to the centerline of the stem on the top plate. Either action lifts the set lever post clear of the stem. The button (above left ) on our movement is held in the depressed position with a small screw driver or shapened pegwood while the stem is gently withdrawn from the movement. It is important that just enough pressure be applied to the button to release the stem, push too hard and you will likely dislodge parts in the keyless works. This is not a major problem if you are decasing the movement for complete service, but if the intent was a minor adjustment you will find you now have to disassemble the dial side to put things right. It is best to press the button while applying a gentle pull on the stem. That way you should feel the stem release and not press any further than necessary. The stem may also require a gentle, slight turn of the crown as it is being withdrawn --- 
|
||
|
watchsolo
新進會員 |
發表於: 星期三 2008-06-11 11:29
謝謝您!
這錶的結構是由錶面玻離處開啟的,不是由錶背 錶冠應該得以先與龍心分離,錶鏡卸下才得以倒出錶蕊的 不知道說的對不對,因為它的錶殼是一體的,沒有分離的錶背 想請教同好,這種結構錶的錶冠的正確卸離方法,怕惡搞弄毀了. 謝謝喔! |
||
|
0925
中級會員 |
發表於: 星期三 2008-06-11 12:00
Mr. watchsolo,
If it is only water resistant to 50 meters and is having a see-through caseback, I think the caseback is a snap-on type. Post a photo up here, let's see which is the appropriate method. |
||
|
kisc
中級會員 |
發表於: 星期三 2008-06-11 13:22
============================================== 應該是這種結構....您參考一下 http://www28.discuss.com.hk/viewthread.php?tid=4526203&extra=page%3D5&page=1 |
||
|
kisc
中級會員 |
發表於: 星期三 2008-06-11 13:30
=================================================== 您這應該洗洗油就解決了 但洗油要用到很多工具跟材料..... 您如沒有點真功夫....我真的建議您放棄 |
||
|
watchsolo
新進會員 |
|||
|
watchsolo
新進會員 |
發表於: 星期四 2008-06-12 07:27
晚上按照網頁上頭說明方法小心且緩慢的施力,龍心(stem)&錶冠(crown)真的滑了出來.
但是,它不是想像中的"兩節式"的,它就是一般(一根)的龍蕊,是我猜測錯誤. 事情又回到原點了,它應該是被我"暴力"扯出來的 就整個錶的結構而言,要卸下stem應該會有它正確的方法才對 請教各位巴友啦! 還未詳看機蕊,希望stem的結構部分不會被扯壞了. |
||
第1頁(共2頁)
您 無法 在這個版面發表文章
您 無法 在這個版面回覆文章
您 無法 在這個版面編輯文章
您 無法 在這個版面刪除文章
您 無法 在這個版面進行投票
您 無法 在這個版面上傳附加圖檔
您 可以 在這個版面下載已上傳之附加圖檔
您 無法 在這個版面回覆文章
您 無法 在這個版面編輯文章
您 無法 在這個版面刪除文章
您 無法 在這個版面進行投票
您 無法 在這個版面上傳附加圖檔
您 可以 在這個版面下載已上傳之附加圖檔